Workbench cabinet – Time for do it yourself projects can be wasted looking for tools or wrestling to make the pieces fit without the appropriate table top to squeeze them. A simple workbench can make these problems a thing of the past. A heavy frame and the top is the key to a successful work bench. You can build your own from common materials with a few simple tools. Old cabinets serve as a base for a homemade workbench and allow you to put together countertop fast. In addition to supporting the work surface, add cabinets built storage underneath. Thick plywood gives the canvas. If you have additional lockers available, mount them on the wall above the workbench. This creates a custom garage workbench and storage center for all your tools and supplies.
Select two kitchen base cabinets from a home improvement store or cabinet recovered from your own home or someone else’s. Box is usually a standard 34-1 / 2 inches tall, which is a functional height of the work bench. Place the two cabinets on the floor of the garage where you want the workbench. Space box to determine how long you want the workspace of the bench to be. The length is a matter of personal preference which takes into account the amount of available space on the wall. Screw presses in the wall by a stud. This provides the base of the workbench cabinet stability, so the cabinets do not change.
Then, measure from the outer edge of workbench cabinet to the outer edge of the second cabinet to obtain dimensions of the countertop. And also measure the cabinet front to back, which should be about 24 inches. This gives you your measurements for plywood. A small overhang is good, but too much overhang causes instability in the ends of the bench. Cutting plywood size. The center piece of plywood cabinets. Make sure it is the same amount of overhang on both ends. Nail plywood in the cabinets below to keep the top from moving. Pre-drill holes and screw top to the cabinets for additional stability. And don’t forget do it carefully.