Drum end table – Drums is an artwork; they are made with precision and out of the finest woods. Many drums sit in attics, basements and garages just gathering dust, when they could be used as a table for your bedroom or family room. Although they are an instrument, use them for decoration can be done by changing them in a table. Using plywood, glass and tack putty, you can assemble your own tables. How to use the drum end table. Place a piece of round cut tabletop glass on top of a drum, and it immediately becomes a table. Two of the same can be arranged on either side of a sofa or bed as an end table or night stand. To secure the glass to the drum, use nail glue or tack putty, which is easily removed and does not damage the wood on the drum. Roll four small pieces of nail glue in small pellet-sized balls. Remember the putty will show through the glass, so it must be good looks.
Use a piece of wood as a table top for your drums if you have small children or pets that are active. Have a small piece of plywood cut at your local home store for each drum. It can be circular or square, either form works. Stain the plywood by using stain matching wood tone of the drum, or a few shades darker. Place a small drum on top of a larger drum for a layered drum end table look and more height to the table. Using plywood cut to size for the top of the larger drum will carry the weight of the smaller drum top. Use glass or plywood tabletop. Stick the pieces together using the nail glue.
How to use the drum end table. Measure the length of the drum and pick up three small wooden legs at your local home store. Make sure you get the right size legs to get the barrel up to the height you want for a table. Paint or stain the legs and screw them into the bottom of the drum. Put them on equal spaces apart to balance the table. Use glass or plywood tabletop.