Square patio table – Construct a teak outdoor slat recliner table creates for you one of the most useful pieces of outdoor furniture for your home. Using some basic material and insightful instructions, you can create a teak slat top table that will last for a lifetime. The teak slat table is a 3 meter square table that stands 3 meters from the ground. To do it by you lets follow instructions below. First, assemble a 3m square of 2-by-4s on the ground by placing 3m long 2-by-4s at the end of each other. Then place the slices on its 2 inch wide sides so that the sides of the square will be 4 inches in height all the way around.
Then nail through the two inch sides of 2-by-4’s with 4 inch decking nails and into the end of each side board to create the three feet in square. Continues with attach a 3-meter 4-fold-4 to all corners of the square by racing 4-times-4 vertically in each corner and hammering 4-inch PRYDNAD nails through the square’s 2-inch thick sides and securing 4-by-4 in every corner. Then stand the table on the legs by turning it over. Then set the 3 meter long 1-by-6 teak lists in length from one side of the square to the other. Secure the 1-by-6s to the table by nailing 2 inch truss nails through the slat’s 1 inch thick sides and in the square patio table frame.
Now the top of the table has been made with teak lists. Smooth the top of the table by grinding it with sandpaper stuck around the grinding block. The last step in this DIY square patio table project, cover the table with polyurethane lacquer on all sides for weatherproof table. Use brush for this task. You have finished the table now and can use it outside on your patio. And now you can enjoyed at patio with new table by yourself. So, I think this DIY project give something sense, like feel good and satisfied, proud of yourself. Doing something with good feeling, happy create something also decorating your home.