Rectangle kitchen table – Building rustic round kitchen table can be a fun and rewarding experience that is enjoyed at every meal time. There are many designs for the kitchen table, and it is possible to create a new kitchen table for a weekend with a simple design and plan. Cut the legs of the tables from the 2 by 2 wood. Cut the legs of the tables from two by two wood. Each leg should measure 35 inches long. Cut the table top from the 3/4-inch-thick piece of wood. Cutting table top from 3/4-inch thick piece of wood. The top of the table to measure 3 feet wide and 4 feet long. Attach an L-shaped bracket to the top of each leg with screws. Attach an L-shaped bracket to the top of each leg by screws. Ensure that the top of the bracket is flush with the top of the leg. Repeat this step until all of the legs have an L-shaped bracket secured to two adjacent sides of the leg.
Place a blanket on the floor and set the table top on the blanket with the top-side touching the blanket. Place a felt on the floor and set the table top on the blanket with the top moving felt. The blanket helps to avoid scratches on the table top when the table is mounted. Measure 1 1/4 inches in from the edge of the table top at each corner and land. Action 1 1/4 inches in from the edge of the table top in each corner and mark. This is where the legs will be positioned to allow a slight overhang on the tabletop. Position the legs with the marks. Place the legs with the markings. Make sure that the L-shaped brackets are facing the center of the table.
Secure the leg to the table top with half-inch screws and secure the loose side of the L-shaped bracket table top. The leg to the table top by 1/2-inch screws and secure the loose side of the L-shaped bracket tabletop. Repeat this step until all the legs are attached to the table and all of the L-shaped brackets secured. Turn the table over onto the legs and sand the entire surface of the table until all the sharp edges are smoothed out. Turn the table of the legs and sand the entire surface of the table until all sharp edges smoothed.