End tables with marble tops – Building a table frame is a project that most homeowners can fill on their own in just a few hours. Use a tape measure to measure the length and width of your marble plate. Subtract four inches from the length and width of the plate to find the dimensions of your table frame. Cut two pieces of two and four hardwood to the length of measurement you only took with a circle saw. Stand the four boards upright on their longest narrow edges. Arrange the boards in a rectangular shape, sandwiching the shorter boards between the ends of the longer ones. Run 4-inch wood screw through the longer boards in the thickness of the shorter to secure the frame.
Cut four 4-by-4 inch hardwood inserts to the desired height on your desk frame. These services will be the legs for your end tables with marble tops. Stand the four table legs upright in each of the four corners inside the hardwood frame you just designed. Preload holes through the outside of the table frame in the table legs on each side where the legs touch the frame. Insert a 5-inch carton bolt into each pre-drilled hole and tighten it by hand with a screwdriver. Add extra support for your desk frame by driving 2-inch wooden screws at an angle through the table legs inside the hardwood frame. Marble is very heavy, so reinforces your table frame as much as possible to support the weight of the tabletop.
Cut a piece of 1/2-inch plywood to the length and width dimensions in the end tables with marble tops frame. Paint or bump the filled table frame to match the existing interior system in your room. Take color marble into consideration when selecting a color for your table frame so the two parts of the table do not collide. Place the table frame in the desired position when someone helps you lift the marble disc and place it on top of the frame. Adjust the marble so that it is centered over the frame. It should hang over the edges of the frame by about two inches on all four sides.Tags:narrow bedside table